PERTH RETICULATION  REPAIRS

Reticulation Problems We Repair

A reticulation system can develop electrical, hydraulic or mechanical faults.

Aquarian Drilling provides fault finding and repairs for problems including:

Reticulation not working
One or more stations not operating
Station will not turn off
Low sprinkler pressure
Poor sprinkler coverage
Dry patches in lawns and gardens
Controller not operating
Controller not starting the bore pump
Faulty solenoid valves
Buried or lost solenoid valves
Broken field wiring
Broken underground pipes
Leaking reticulation
Old Dicon pipe failures
Broken pop-up sprinklers
Blocked sprinkler nozzles
Bore-start circuit faults
Manual systems requiring automation
Additional irrigation zones
Uneven pressure between stations

Rather than simply replacing the component that appears to be causing the problem, we investigate the system to identify the actual fault.

Reticulation Fault Finding & Diagnosis

Correct diagnosis can save considerable time and unnecessary repair costs.

A sprinkler pressure problem, for example, does not automatically mean the water supply is inadequate.

Low pressure can result from:

Underground pipe leaks
Partially opening solenoid valves
Blocked sprinklers or nozzles
Pipe restrictions
Incorrect pipe sizing
Too many sprinklers operating on one station
Poor irrigation design
Insufficient mains pressure

On a bore-fed system, pump performance, bore yield and groundwater level can also affect pressure.

Likewise, a station that will not operate may have a failed solenoid valve, broken field wiring or controller fault.

Aquarian Drilling can assess the controller, valves, wiring, pipework, sprinklers and available water supply to determine where the problem originates.

Mains Water Reticulation Repairs Perth

Aquarian Drilling repairs mains-supplied reticulation systems throughout Perth.

If your garden irrigation is connected directly to the mains water supply, we can diagnose and repair:

Controllers
Solenoid valves
Buried solenoids
Field wiring
Broken underground pipes
Reticulation leaks
Pop-up sprinklers
Gear-drive sprinklers
Blocked or damaged nozzles
Low pressure
Poor sprinkler coverage
Dry areas
Stations that will not operate
Stations that will not shut off
Automatic watering systems

Underground leaks can cause significant water loss as well as reducing pressure throughout the irrigation system.

Signs can include unusually wet areas, water surfacing when a station operates, suddenly reduced sprinkler pressure or one station performing substantially worse than the others.

We identify the cause before recommending the repair.

Bore-Fed Reticulation Repairs Perth

Aquarian Drilling also specialises in reticulation systems supplied by water bores.

These systems can be more complicated to diagnose because the bore, pump, electrical controls and reticulation all need to operate correctly together.

A fault that appears to be within the reticulation may actually be caused by:

Bore pump failure
Pump motor fault
Pump-start circuit
Controller output
Failed contactor or relay
Motor overload
Damaged electrical cable
Reduced bore flow
Falling groundwater level
Insufficient pump pressure
Excessive irrigation demand

Aquarian Drilling works with water bores, bore pumps, electrical controls and reticulation.

This allows us to assess the complete system when the cause of the problem is unclear.

Reticulation Controller Repairs & Replacement

The irrigation controller operates the automatic watering system.

Common controller problems include:

Blank display
No power
Incorrect programming
Stations not starting
Failed station outputs
Bore pump not starting
Lost watering programs
Electrical damage
Controller repeatedly resetting
Old or obsolete equipment

We test the controller and associated wiring before deciding whether repair, reprogramming or replacement is required.

Where replacement is necessary, Aquarian Drilling can supply and install suitable modern irrigation controllers from established manufacturers including Hunter, Rain Bird and Weathermatic.

We can also program the controller for the irrigation system and applicable watering requirements.

Reticulation Electrical & Wiring Fault Finding

Underground reticulation wiring faults can be difficult to locate without suitable diagnostic equipment.

Problems can include:

Broken field wires
Poor underground connections
Corroded electrical joints
Damaged solenoid circuits
Incorrectly wired valves
Controller wiring faults
Bore pump-start circuit faults
Short circuits
Open circuits
Intermittent electrical faults

Aquarian Drilling's in-house electrical capability allows us to investigate irrigation wiring and, where applicable, the associated bore and pump electrical controls.

This is particularly useful where the controller appears to operate correctly but a valve or bore pump fails to respond.

Solenoid Location, Repairs & Replacement

Can't Find a Buried Solenoid?

Solenoid valves are often buried beneath lawn, garden beds, soil, mulch or paving.

Over time, landscaping changes can make the original valve position difficult to find.

Aquarian Drilling uses specialist locating equipment to trace irrigation wiring and identify hidden solenoid valves.

Accurate location reduces unnecessary excavation and makes the subsequent repair considerably easier.

A faulty solenoid valve can cause a station to:

Fail to turn on
Remain permanently on
Operate intermittently
Leak continuously
Have reduced water flow
Fail electrically

The problem may be the solenoid coil, valve diaphragm, internal debris, field wiring or controller circuit.

We test the valve and associated circuit before determining whether servicing or replacement is required.

Broken Reticulation Pipe Repairs

Broken underground pipework can cause water loss, low pressure, flooding and poor sprinkler performance.

Aquarian Drilling repairs:

PVC pressure pipe
Poly pipe
Irrigation mains
Reticulation laterals
Valve connections
Bore discharge pipework

The correct repair method depends on the pipe material, diameter, operating pressure and condition of the existing system.

Where a leak is not immediately visible, system testing can help identify the likely cause and location.

Dicon Pipe Repairs Perth

Specialist Repairs for Older Perth Reticulation Systems

Many older Perth irrigation systems contain Dicon pipe.

Replacement fittings for some older Dicon installations can now be difficult to obtain.

Aquarian Drilling has experience repairing these systems and can manufacture or adapt suitable fittings and couplings where conventional replacement fittings are unavailable.

Where the existing pipe remains serviceable, this can avoid unnecessarily replacing large sections of an older reticulation system.

This is particularly relevant to established Perth properties with ageing irrigation infrastructure.

Sprinkler Repairs, Low Pressure & Dry Spots

Aquarian Drilling repairs and replaces damaged or poorly performing garden sprinklers.

Our work includes:

Pop-up sprinkler replacement
Gear-drive sprinkler replacement
Nozzle replacement
Blocked sprinkler cleaning
Raising low sprinklers
Repositioning sprinklers
Correcting spray direction
Matching suitable sprinkler types and nozzles

Poor coverage does not always mean the irrigation system needs to run longer.

Dry areas can result from incorrect sprinkler spacing, blocked nozzles, damaged sprinklers, poor pressure, mismatched sprinkler types or badly balanced irrigation zones.

We assess the available flow, pressure and sprinkler coverage before recommending changes.

Reticulation Upgrades, New Zones & Automation

Gardens and landscaping change over time.

Existing reticulation systems can often be modified or expanded to suit new lawn areas, garden beds or changes to the property.

Aquarian Drilling can provide:

Additional irrigation zones
New solenoid valves
Controller upgrades
Additional sprinklers
System modifications
Automatic irrigation controls
Manual-to-automatic conversions

Before adding a new irrigation zone, we consider the available flow, pressure, existing pipework, controller capacity and water source.

This is particularly important with bore-fed systems because the additional irrigation demand needs to remain within the available performance of the bore and pump.

Older manual bore systems can also often be converted to automatic operation using an irrigation controller, solenoid valves and suitable pump-start controls.

Reticulation Programming & Watering Days

Correct controller programming helps the irrigation system operate efficiently.

Poor programming can result in:

Multiple unnecessary start times
Incorrect watering days
Excessive watering
Missed watering stations
Excessive station run times
Insufficient watering
Unnecessary bore pump operation

Aquarian Drilling can program suitable irrigation controllers and explain their basic operation.

Perth reticulation systems should also be programmed according to current Western Australian watering rosters and seasonal sprinkler restrictions.

Check Your Watering Days – Water Corporation

Locating Buried Water Bores

Submersible water bores can sometimes become hidden beneath paving, landscaping or later property alterations.

Where a bore-fed reticulation system has failed and the location of the bore is unknown, accessing the bore may be essential to diagnosing the problem.

Aquarian Drilling uses specialist locating equipment to trace electrical cables and identify the likely position of buried bore heads.

This can reduce unnecessary excavation and allow access for pump testing, servicing or replacement.

Commercial Reticulation Repairs Perth

Aquarian Drilling also undertakes reticulation fault finding and repairs for commercial and larger irrigation systems.

Our experience includes systems servicing:

Commercial properties
Schools
Sporting grounds
Large gardens
Rural properties
Vineyards
Bore-fed irrigation systems

Larger systems require particular attention to available flow, pressure, irrigation demand, pipe sizing, pump duty and electrical controls.

Our combined irrigation, bore, pump and electrical experience is particularly useful where these systems interact.

Real Perth Reticulation Repair Projects

Aquarian Drilling has completed reticulation repairs throughout the Perth metropolitan area.

Rather than simply saying we service Perth, our existing project gallery documents real irrigation repairs across numerous suburbs.

Morley – Buried Solenoid Location

A concealed irrigation solenoid was located using specialist locating equipment, allowing access to the valve without unnecessary excavation.

Dianella – Solenoid Replacement

A failed irrigation solenoid affecting station operation was diagnosed and replaced.

Churchlands – Sprinkler Fault Finding & Repairs

Sprinkler faults affecting garden coverage were assessed and repaired.

Ballajura – Reticulation Installation

Reticulation work completed as part of a bore-fed irrigation installation.

Warwick – Sprinkler Repairs

Damaged and poorly performing sprinklers were repaired and replaced.

Landsdale – Reticulation & Sprinkler Work

Reticulation work completed to restore and improve irrigation performance.

Our other documented Perth reticulation work includes:

Trigg
Leeming
Ellenbrook
Alfred Cove
Bedford
Kallaroo
Como
Floreat
Salter Point

View Our Reticulation Repair Gallery

Why Choose Aquarian Drilling for Reticulation Repairs?

Mains & Bore-Fed Systems

Aquarian Drilling repairs conventional mains water reticulation as well as bore-fed irrigation systems.

In-House Electrical Expertise

Electrical faults involving irrigation controllers, field wiring and bore controls can be diagnosed as part of the complete system.

Specialist Fault Finding

We use appropriate diagnostic and locating equipment rather than unnecessarily replacing components.

Solenoid & Cable Location

Specialist locating equipment allows us to trace wiring and find buried irrigation valves.

Water Bore & Pump Expertise

Where a reticulation system is bore-fed, we can also investigate the pump, electrical controls and bore itself.

Older Perth Reticulation Systems

Our experience includes older irrigation infrastructure such as Dicon pipe and manually operated bore systems.

Domestic & Commercial Systems

We work on residential gardens as well as larger commercial, school, sporting and rural irrigation systems.

Family Owned Since 1994

Aquarian Drilling has more than 30 years of experience working with Perth irrigation, water bore, pump and electrical systems.

Reticulation Repair FAQs

Does Aquarian Drilling repair mains water reticulation?

Yes. We repair conventional mains-supplied garden reticulation throughout Perth. You do not need to have a water bore to use our reticulation repair service.

Does Aquarian Drilling repair bore-fed reticulation?

Yes. We repair bore-fed reticulation and can also diagnose associated bore pump and electrical control faults.

Why has one reticulation station stopped working?

The fault may be the solenoid valve, field wiring, controller output or pipework. Testing the affected station helps identify the actual cause.

Why won't my reticulation turn off?

A station that continues running may have a jammed or damaged solenoid valve, debris inside the valve or an electrical or controller fault.

Why do my sprinklers have low pressure?

Possible causes include underground leaks, valve restrictions, blocked sprinklers, excessive sprinkler demand or pipe-sizing problems. On bore-fed systems, pump performance and bore yield can also affect pressure.

Can you locate buried solenoid valves?

Yes. We use specialist locating equipment to trace irrigation wiring and identify buried solenoid valves.

Can you repair reticulation wiring?

Yes. Our in-house electrical capability allows us to diagnose and repair suitable irrigation wiring and bore-control faults.

Can you repair old Dicon pipe?

Yes. Aquarian Drilling has experience repairing older Dicon reticulation systems where standard fittings may no longer be readily available.

Can you replace my irrigation controller?

Yes. We can test the existing controller and replace it where necessary. We can also program the replacement controller for the irrigation system.

Can you automate an old manual bore system?

In many cases, yes. Suitable manual systems can be converted using an irrigation controller, solenoid valves and appropriate pump-start controls.

Can you add another irrigation station?

Often, yes. We first assess the available pressure, flow, controller capacity and existing system before adding another zone.

Can you repair sprinklers and dry spots?

Yes. We can replace damaged sprinklers, correct nozzles and positions and investigate pressure and coverage problems.

Why won't my bore start when the reticulation controller operates?

Possible causes include the controller output, pump-start circuit, electrical wiring, pump controls or the bore pump itself. We can investigate the complete bore and reticulation start circuit.

Can you locate a water bore that has been covered over?

In many cases, yes. Specialist locating equipment can help trace the electrical cable and determine the likely position of a buried submersible bore.

Reticulation Repairs Across Perth

Aquarian Drilling provides mains water and bore-fed reticulation repairs throughout the Perth metropolitan area.

Our documented work includes:

Malaga
Ballajura
Landsdale
Warwick
Morley
Dianella
Trigg
Kallaroo
Churchlands
Floreat
Bedford
Ellenbrook
Leeming
Como
Alfred Cove
Salter Point

We service Perth's northern, southern, eastern and western suburbs, as well as bore-fed irrigation systems throughout the Perth Hills and surrounding areas.

View All Aquarian Drilling Service Areas

Reticulation Advice & Recent Projects

Learn more about reticulation repairs, irrigation faults, controllers, solenoids and bore-fed watering systems through our technical advice and recent repair projects.

Time to Get Your Bore and Reticulation System Ready for Summer!

Dianella – Bore Pump & Reticulation Repairs

Bore Pump & Retic Repairs in Ellenbrook

Bore Pump & Retic Repairs Ballajura | Aquarian Drilling Perth

Bore Water Filtration Perth – Stop Sprinkler Blockages Fast

Need Your Reticulation Repaired?

If your reticulation has stopped working, has low pressure, a faulty controller, hidden solenoid, broken wiring, damaged pipework or poorly performing sprinklers, contact Aquarian Drilling.

We repair both mains-supplied and bore-fed reticulation systems.

If the system is supplied by a water bore, we can also investigate the bore, pump and electrical controls to determine whether the fault lies outside the reticulation system.

Aquarian Drilling Pty Ltd

Phone: 0417 928 330
Email: perthbores@iinet.net.au

Family Owned & Operated Since 1994

Reticulation Repairs | Mains & Bore-Fed Irrigation | Controllers | Solenoids | Electrical Fault Finding | Sprinklers | Bore Pumps

Request a Reticulation Repair Quote

 

 

 

Solenoid Location

We have specialised equipment that allows us to locate solenoids in your garden, quickly keeping your costs down. (and we do not charge you extra to use the locators like other companies do)

Our staff have a proven track record and can even find solenoid valves that are buried under concrete or brick paving.

Solenoid Replacement 

If you are having problems with stations staying on or not coming on at all, it is more than likely an issue with your solenoid valves. We cary a full range of replacement solenoid valves and parts to repair or replace the valve depending on the fault.

Reticulation Wiring Problems

Can be very frustrating to repair if you do not have the right tools and practical experience. Wiring problems include, Broken or damaged field wires, incorrectly wired valves, faulty bore control circuits and more. Our in house Bore Specialist Electrician has the tools and years of experience to fix any wiring problem.

Reticulation Parts Supplied for DIY

Supply of quality reticulation products, including valves, solenoids, controllers etc for DIY installation.

Additions to Existing Reticulation Systems

We design and install new additions/zones to existing  reticulation systems. We cover both domestic and commercial installations.

Manual Reticulation Systems Automated

Tired of having to manually start your bore pump and change stations? Or having to arrange someone to turn the system on if you go away on holiday? Our licensed staff can automate your existing manual  reticulation system by Installing a controller and solenoid valves to automate existing manual reticulation systems.

The new system will be set to operate on your watering days - basically set and forget.

Repair, Fitting, Manufacture and Installation of Dicon Pipe - 

All aspects of fitting / repairing  Dicon pipe products.