Aquarian Drilling

Keep your garden and irrigation system running reliably with professional water bore services in Canning Vale. Aquarian Drilling provides water bore drilling, bore repairs, pump services, specialist bore electrical and reticulation repairs throughout Canning Vale and Perth's southern suburbs. With over 30 years of local experience, we install, diagnose and repair bore systems for residential and commercial properties.

Canning Vale Ground Conditions & Water Bore Drilling

Water bore drilling conditions in Canning Vale can vary between properties, so bore depth and groundwater conditions should be assessed for the individual site. Aquarian Drilling has extensive experience drilling and servicing water bores across Perth’s southern suburbs and understands the importance of matching the bore construction and pumping equipment to the conditions encountered.

Once groundwater is established, correct bore development and pump selection are important for reliable operation. The pump needs to suit the bore depth, available water level, required flow and the irrigation system it will supply.

Existing Canning Vale bores can also develop problems with pumps, electrical controls, rising mains, valves and reticulation systems. Aquarian Drilling can diagnose the complete system rather than automatically assuming that a bore which has stopped supplying water needs to be replaced.

Our Water Bore Services in Canning Vale

New Water Bore Drilling & Installation

• Site assessment and compliant bore construction

• Screens and casing suited to local formations

• Bore development using air-lifting or chemical cleaning

• Submersible pump installation with matched controls

• Reticulation cut-in and zone balancing

Bore Pump Repairs & Replacement

• Diagnosis of low flow, low pressure or tripping issues

• Removal and megger testing of pumps

• Motor and wet-end replacement

• Fast parts sourcing to reduce downtime

Specialist Bore Electrical (EC13614)

• Controller and pump fault-finding

• Start boxes, switches, float controls, VFD/soft-start setups

• Cable location and repairs

• Wi-Fi and smart controller integration

Bore Rehabilitation & Performance Recovery

• Air development to clear fines

• Chemical cleaning for iron bacteria and scale

• Jetting and surging to restore yield

• Before/after flow and pressure testing

Stuck/Dropped Pump Retrieval & Bore Locating

• Safe mechanical retrieval methods

• Non-destructive bore locating

• Remediation plans for collapsed or blocked casings

Reticulation Integration & Optimisation

• Cut-ins, valve checks and leak repairs

• Nozzle balancing and zone programming

• Seasonal adjustments for efficiency

Water Quality Testing & Treatment

• On-site tests and laboratory sampling

• Advice on iron, hardness and filtration

• Preventative maintenance to reduce fouling

Insurance & Builder Reports

• Photo-backed fault and damage reports

• Scope and cause analysis

• Liaison with insurers, assessors and builders

Shared, Strata & Commercial Systems

• Shared bore agreements and metering

• Duty/standby pumps and control systems

• Preventative maintenance schedules

Water Bore Drilling & Repair Experience in Canning Vale

Aquarian Drilling has extensive experience drilling, repairing and maintaining water bores throughout Perth’s southern suburbs. Our work includes new bore drilling, bore pump replacement, electrical fault diagnosis, bore rehabilitation and repairs to bore-fed reticulation systems.

For existing Canning Vale bores, a loss of water or pressure does not necessarily mean the bore has failed. Problems can be caused by the pump, electrical equipment, controllers, valves, pipework or the reticulation system. We assess the complete installation to identify the actual cause before recommending repairs or replacement.

For new installations, we select the bore construction, pump and control equipment around the groundwater conditions encountered and the property's irrigation requirements, providing a complete system rather than treating the bore, pump and reticulation as separate components.

FAQs

How deep are water bores in Canning Vale?

Water bore depth in Canning Vale varies between properties depending on groundwater levels and the geological conditions encountered. There is no single depth that applies throughout the suburb, so neighbouring bores can provide useful information but should not be treated as a guarantee of the depth required on another property.

My Canning Vale bore has stopped working — does it need replacing?

Not necessarily. A bore that has stopped supplying water may have a pump, electrical, controller, valve, pipework or reticulation fault rather than a failed bore. Aquarian Drilling can diagnose the complete system and identify the cause before recommending repair or replacement.

Do you handle pump repairs and replacements?

Yes, we repair, replace, and recommission both submersible and centrifugal pump systems.

Can you provide a quote for bore drilling or repairs?

Yes. We provide quotations for new water bore installations and can assess existing bore, pump and reticulation systems before recommending repairs. Diagnostic and site assessment charges may apply depending on the work required.

Request a Quote or Assessment

Call Steve on 0417 928 330 or James on 0407 885 091.

Nearby Areas We Service

• Willetton Water Bore Drilling & Repairs

• Leeming Water Bore Drilling & Repairs

• Riverton Water Bore Drilling & Repairs

At Aquarian Drilling, we provide professional water bore drilling, bore repairs, pump services, specialist bore electrical and reticulation repairs throughout Canning Vale and Perth’s southern suburbs. With over 30 years of experience, our family-owned Western Australian business can diagnose, repair and install complete water bore systems.

📍Servicing Canning Vale & Perth’s southern suburbs

📞 Call us now on 0417 928 330 or 0407885091
📧 Email: perthbores@iinet.net.au

Canning Vale