Aquarian Drilling

Water bore drilling in Mount Helena requires experience with Perth Hills geology, hard-rock formations and variable fractured-rock groundwater conditions. Aquarian Drilling provides professional water bore drilling, bore repairs and pump services throughout Mount Helena and surrounding Perth Hills areas. With over 30 years of drilling experience, we design, install and repair bore systems for residential and rural properties, larger blocks, gardens, irrigation and tank-filling applications.

Mount Helena Geology & Water Bore Drilling

Water bore drilling in Mount Helena can encounter variable Perth Hills geology, including laterite, clay, weathered or decomposed granite, hard granite, quartz and fractured rock. Ground conditions can change significantly between properties and across relatively short distances.

Groundwater in the Mount Helena area is commonly associated with weathered zones, joints and fractures within the underlying rock rather than a uniform shallow water table. This means bore depth and water yield can vary considerably between nearby properties. Aquarian Drilling considers available groundwater information, local geology, site access and the formations encountered during drilling.

Hard-rock formations may require DTH air-hammer drilling to progress the bore and investigate potential water-bearing fractures. Once groundwater is encountered, correct bore construction and development are important to obtain the best practical yield. Lower-recharge bores can also be designed to progressively fill a storage tank rather than directly supplying a high-demand reticulation system.

Our Water Bore Services in Mount Helena

New Water Bore Drilling & Installation

• Site assessment and compliant bore construction

• Screens and casing suited to local formations

• Bore development using air-lifting or chemical cleaning

• Submersible pump installation with matched controls

• Reticulation cut-in and zone balancing

Bore Pump Repairs & Replacement

• Diagnosis of low flow, low pressure or tripping issues

• Removal and megger testing of pumps

• Motor and wet-end replacement

• Fast parts sourcing to reduce downtime

Specialist Bore Electrical (EC13614)

• Controller and pump fault-finding

• Start boxes, switches, float controls, VFD/soft-start setups

• Cable location and repairs

• Wi-Fi and smart controller integration

Bore Rehabilitation & Performance Recovery

• Air development to clear fines

• Chemical cleaning for iron bacteria and scale

• Jetting and surging to restore yield

• Before/after flow and pressure testing

Stuck/Dropped Pump Retrieval & Bore Locating

• Safe mechanical retrieval methods

• Non-destructive bore locating

• Remediation plans for collapsed or blocked casings

Reticulation Integration & Optimisation

• Cut-ins, valve checks and leak repairs

• Nozzle balancing and zone programming

• Seasonal adjustments for efficiency

Water Quality Testing & Treatment

• On-site tests and laboratory sampling

• Advice on iron, hardness and filtration

• Preventative maintenance to reduce fouling

Insurance & Builder Reports

• Photo-backed fault and damage reports

• Scope and cause analysis

• Liaison with insurers, assessors and builders

Shared, Strata & Commercial Systems

• Shared bore agreements and metering

• Duty/standby pumps and control systems

• Preventative maintenance schedules

Water Bore Drilling & Repair Experience in Mount Helena

Aquarian Drilling provides water bore drilling, bore repairs, pump servicing and bore system upgrades throughout Mount Helena and surrounding Perth Hills areas. Our experience includes hard-rock drilling, new bore construction, bore development, pump selection and replacement, electrical fault diagnosis, bore rehabilitation and integration with existing reticulation systems.

Where groundwater recharge is limited, we can design the pumping system around the sustainable supply available from the bore. This may include controlled pumping to a storage tank, a separate pressure pump for reticulation and suitable pump protection to prevent dry running and allow the bore time to recover.

FAQs

How deep are water bores in Mount Helena?

Water bore depth in Mount Helena can vary considerably between properties because groundwater is commonly associated with weathered and fractured rock zones. There is no standard bore depth that applies across the area. Aquarian Drilling considers available groundwater information, local geology and site conditions, with the final depth determined by the formations and groundwater encountered during drilling.

Do you handle pump repairs and replacements?

Yes, we repair, replace, and recommission both submersible and centrifugal pump systems.

Can you provide a quote for bore drilling or repairs?

Yes. We provide quotations for new water bore installations and can assess existing bore, pump and reticulation systems before recommending repairs. Diagnostic and site assessment charges may apply depending on the work required.

Request a Quote or Assessment

Call Steve on 0417 928 330 or James on 0407 885 091.

Nearby Areas We Service

• Stoneville Water Bore Drilling & Repairs

• Chidlow Water Bore Drilling & Repairs

• Mundaring Water Bore Drilling & Repairs

At Aquarian Drilling, we provide professional water bore drilling, bore repairs and pump services in Mount Helena and throughout the Perth Hills. With over 30 years of experience, our family-owned Western Australian business provides complete bore, pump, electrical and reticulation solutions, including systems designed for hard-rock and lower-recharge bores.

📍Servicing Mount Helena, Perth Hills & surrounding areas

📞 Call us now on 0417 928 330 or 0407885091
📧 Email: perthbores@iinet.net.au

Mount Helena