Aquarian Drilling

Aquarian Drilling has been drilling, repairing and restoring water bores in Noranda for more than 30 years. The suburb has many established properties with older garden bore systems, including concrete-ring wells, spear bores and centrifugal pumps, as well as newer submersible installations. We provide new water bore drilling, bore repairs, pump replacement, re-spearing and bore rehabilitation, with the aim of repairing or restoring an existing system where practical before recommending complete replacement.

Noranda Ground Conditions & Existing Bores

Noranda is situated on Perth’s Swan Coastal Plain, an area where domestic garden bores naturally draw fresh, unconfined groundwater from the shallow Superficial aquifer. Your property sits directly over the Bassendean Sand formation. This geology is characterized by clean, highly permeable quartz sands that act like a natural sponge, allowing winter rainfall to soak rapidly into the ground and recharge the water table.

The water table in Noranda is typically shallow, with a total saturated thickness ranging between 15 to 30 metres. Because the sand layers are highly porous and water moves through them easily, drilling a new garden bore here is straightforward and consistently yields exceptional water flow rates for sustaining lawns and gardens.

Many established Noranda properties have older concrete-ring wells with spears and centrifugal pumps installed in the well. These systems can often continue operating for many years, but problems can develop as the spear, non-return valve, pump, suction pipework or bore itself deteriorates.

Where an older Noranda bore has gradually lost flow or become difficult to prime, we assess the complete system before recommending replacement. Depending on its condition, an existing well may be suitable for re-spearing, re-boring, pump repairs or rehabilitation. Preserving an existing bore can be particularly worthwhile where it has historically produced good-quality, non-staining water.

Groundwater level and bore condition can vary between properties, so we assess each Noranda bore individually before recommending drilling, re-spearing, pump replacement or rehabilitation.

Our Water Bore Services in Noranda

New Water Bore Drilling & Installation

• Site assessment and compliant bore construction

• Screens and casing suited to local formations

• Bore development using air-lifting or chemical cleaning

• Submersible pump installation with matched controls

• Reticulation cut-in and zone balancing

Bore Pump Repairs & Replacement

• Diagnosis of low flow, low pressure or tripping issues

• Removal and megger testing of pumps

• Motor and wet-end replacement

• Fast parts sourcing to reduce downtime

Specialist Bore Electrical (EC13614)

• Controller and pump fault-finding

• Start boxes, switches, float controls, VFD/soft-start setups

• Cable location and repairs

• Wi-Fi and smart controller integration

Bore Rehabilitation & Performance Recovery

• Air development to clear fines

• Chemical cleaning for iron bacteria and scale

• Jetting and surging to restore yield

• Before/after flow and pressure testing

Stuck/Dropped Pump Retrieval & Bore Locating

• Safe mechanical retrieval methods

• Non-destructive bore locating

• Remediation plans for collapsed or blocked casings

Reticulation Integration & Optimisation

• Cut-ins, valve checks and leak repairs

• Nozzle balancing and zone programming

• Seasonal adjustments for efficiency

Water Quality Testing & Treatment

• On-site tests and laboratory sampling

• Advice on iron, hardness and filtration

• Preventative maintenance to reduce fouling

Insurance & Builder Reports

• Photo-backed fault and damage reports

• Scope and cause analysis

• Liaison with insurers, assessors and builders

Shared, Strata & Commercial Systems

• Shared bore agreements and metering

• Duty/standby pumps and control systems

• Preventative maintenance schedules

Water Bore Repair & Re-Spearing Experience in Noranda

Aquarian Drilling has extensive experience repairing and restoring established water bores in Noranda, including older concrete-ring wells with centrifugal pumps and spear bores beneath the well. These systems can often be repaired or re-speared rather than automatically replaced with a completely new bore.

A common problem with older Noranda bore systems is a gradual loss of water or increasing difficulty maintaining prime. The cause may be a deteriorated spear, failed non-return valve, suction leak, worn centrifugal pump or reduced bore performance. We inspect the complete system to identify the actual cause before recommending repairs.

Where the existing well and installation remain serviceable, Aquarian Drilling can assess options including pump repairs, replacement non-return valves, re-spearing, re-boring and bore rehabilitation. Our aim is to retain a productive existing bore where practical, particularly where it has historically supplied good-quality water.

FAQs

How deep are water bores in Ballajura?

Water bore depth in Noranda varies between properties and depends on the local groundwater level and the type of bore system already on the site. Many established Noranda properties have older wells or spear systems, while newer installations may use submersible pumps. Aquarian Drilling assesses the individual property and existing bore condition before recommending drilling, re-spearing, pump replacement or rehabilitation.

Do you handle pump repairs and replacements?

Yes, we repair, replace, and recommission both submersible and centrifugal pump systems.

Can you provide a quote for bore drilling or repairs?

Yes. We provide quotations for new water bore installations and can assess existing bore, pump and reticulation systems before recommending repairs. Diagnostic and site assessment charges may apply depending on the work required.

Request a Quote or Assessment

Call Steve on 0417 928 330 or James on 0407 885 091.

Nearby Areas We Service

• Alexander Heights Water Bore Drilling & Repairs

• Morley Water Bore Drilling & Bore Repairs

• Ballajura Water Bore Drilling & Bore Repairs

At Aquarian Drilling, we provide professional water bore drilling, bore repairs and pump services in Noranda and surrounding suburbs. With over 30 years of experience, our family-owned Western Australian business provides complete bore, pump, electrical and reticulation solutions.

📍Servicing Noranda, Perth’s northern suburbs & surrounding areas

📞 Call us now on 0417 928 330 or 0407885091
📧 Email: perthbores@iinet.net.au

Noranda