Aquarian Drilling

Aquarian Drilling provides professional water bore drilling, bore repairs, pump services, specialist bore electrical and reticulation repairs throughout Willetton and Perth’s southern suburbs. With over 30 years of local experience, we install, diagnose and repair water bore systems for established residential properties, gardens and irrigation systems. Whether an existing bore has stopped working or a new groundwater supply is required, we assess the complete system and recommend the appropriate solution.

Willetton Ground Conditions & Water Bore Drilling

Water bore conditions in Willetton can vary between properties, and an existing bore that stops producing water does not necessarily require replacement. Aquarian Drilling has practical experience inspecting and repairing older bore and well-style installations in Willetton, as well as diagnosing pump, controller and non-return valve faults.

Many established properties have bore systems that have been operating for years. As these systems age, problems can develop with centrifugal or submersible pumps, electrical controls, non-return valves, suction equipment, pipework and the bore itself. Correct diagnosis is important before replacing expensive equipment.

For new water bores, the bore depth, construction and pump are selected around the groundwater conditions encountered and the irrigation demand. For existing installations, we assess the bore, pump and associated equipment as a complete system to determine whether repair, rehabilitation or replacement is the most appropriate option.

Our Water Bore Services in Willetton

New Water Bore Drilling & Installation

• Site assessment and compliant bore construction

• Screens and casing suited to local formations

• Bore development using air-lifting or chemical cleaning

• Submersible pump installation with matched controls

• Reticulation cut-in and zone balancing

Bore Pump Repairs & Replacement

• Diagnosis of low flow, low pressure or tripping issues

• Removal and megger testing of pumps

• Motor and wet-end replacement

• Fast parts sourcing to reduce downtime

Specialist Bore Electrical (EC13614)

• Controller and pump fault-finding

• Start boxes, switches, float controls, VFD/soft-start setups

• Cable location and repairs

• Wi-Fi and smart controller integration

Bore Rehabilitation & Performance Recovery

• Air development to clear fines

• Chemical cleaning for iron bacteria and scale

• Jetting and surging to restore yield

• Before/after flow and pressure testing

Stuck/Dropped Pump Retrieval & Bore Locating

• Safe mechanical retrieval methods

• Non-destructive bore locating

• Remediation plans for collapsed or blocked casings

Reticulation Integration & Optimisation

• Cut-ins, valve checks and leak repairs

• Nozzle balancing and zone programming

• Seasonal adjustments for efficiency

Water Quality Testing & Treatment

• On-site tests and laboratory sampling

• Advice on iron, hardness and filtration

• Preventative maintenance to reduce fouling

Insurance & Builder Reports

• Photo-backed fault and damage reports

• Scope and cause analysis

• Liaison with insurers, assessors and builders

Shared, Strata & Commercial Systems

• Shared bore agreements and metering

• Duty/standby pumps and control systems

• Preventative maintenance schedules

Water Bore Drilling & Repair Experience in Willetton

Aquarian Drilling has practical experience inspecting, diagnosing and repairing water bore systems in Willetton and surrounding southern suburbs. Our work includes older well-style installations, centrifugal and submersible pumps, controllers, non-return valves, electrical faults, bore rehabilitation and bore-fed reticulation systems.

When an established Willetton bore stops working, we investigate the cause rather than automatically recommending replacement. A failed controller, pump, non-return valve, suction problem or deterioration within the bore or spear can produce similar symptoms, so identifying the actual fault is essential before deciding what work is required.

Where an existing bore remains serviceable, repairing or upgrading the pump and control equipment may provide a practical solution. Where the bore itself has deteriorated, we can assess options including rehabilitation, re-spearing, re-boring or replacement.

FAQs

How deep are water bores in Willetton?

Water bore depth in Willetton varies between properties depending on groundwater levels and the ground conditions encountered. There is no single depth that applies throughout the suburb, so the required depth should be assessed for the individual property rather than relying solely on neighbouring bores.

My old Willetton bore has stopped working — does it need replacing?

Not necessarily. Older bore and well systems can stop working because of pump faults, failed controllers, non-return valves, suction problems, electrical faults or deterioration of the bore or spear. Aquarian Drilling can inspect and diagnose the system before determining whether repair, rehabilitation, re-spearing or replacement is required.

Do you handle pump repairs and replacements?

Yes, we repair, replace, and recommission both submersible and centrifugal pump systems.

Can you provide a quote for bore drilling or repairs?

Yes. We provide quotations for new water bore installations and can assess existing bore, pump and reticulation systems before recommending repairs. Diagnostic and site assessment charges may apply depending on the work required.

Request a Quote or Assessment

Call Steve on 0417 928 330 or James on 0407 885 091.

Nearby Areas We Service

• Canning Vale Water Bore Drilling & Repairs

• Leeming Water Bore Drilling & Repairs

• Riverton Water Bore Drilling & Repairs

At Aquarian Drilling, we provide professional water bore drilling, bore repairs, pump services, specialist bore electrical and reticulation repairs throughout Willetton and Perth’s southern suburbs. With over 30 years of experience, our family-owned Western Australian business can diagnose and repair older bore systems as well as drill and equip new water bores.

📍Servicing Willetton & Perth’s southern suburbs

📞 Call us now on 0417 928 330 or 0407885091
📧 Email: perthbores@iinet.net.au

Willetton