Drilling New Water Bore Mosman Park

Drilling a new 67m 4 inch water bore in Wellington Street near the golf course in Mosman Park.

The drill was straightforward. We encountered 4m of sand then the remaining depth was Tamala Limestone, Aeolian calcarenite, variably lithified leached quartz sand. The very base of the bore terminates at the underlying clay interface.

The bore has a groundwater salinity of 1000 mg/L which is within the expected range of 500 to 1000 mg/l TDS and a low risk of iron staining. The PH is slightly alkaline.

Aquarian Drilling are the trusted local experts in Water Bores & Pumps in the Mosman Park, Cottesloe, Peppermint Grove, Claremont and Dalkieth areas.
With over 30 years’ local experience we have drilled a large number of new domestic bores in the area. In addition we also repair water bores, perform rebores and repair or replace both submersible and centrifugal bore pumps.

In Mosman Park and the surrounding suburbs generally the depth to groundwater varies quite considerably based on location. Typically a submersible Mosman Park bore would be drilled between 35 and 60 metres.

If you are considering a water bore, call Aquarian Drilling Perth Water Bores & Pumps on 0417928330. We have extensive local knowledge and experience working in the area.

We can check the depth to water at your home and give an estimate via email or we are happy to meet you onsite to discuss your water bore requirements.

For more information Please visit our main Perth Bore Water Drilling page.

Perth Bore & Pump Repairs